Description
PF90 Dust collector for sand and shot blasters, from PMJ in Poland.
The PF90 dust extractor is designed to remove dust and solid particles from metal, glass and plastic processing machines. The dust extractor reduces the amount of hazardous dust emitted during machine operation and works perfectly in combination with other machines in our range (RB11 and RB7 blasting machines).
The PF90 dust collector is designed to remove dust and solid particles from metalworking, glass and plastic processing machines.
The purpose of the dust collector is to reduce the amount of hazardous dust emitted during machine operation and to work perfectly with other machines in our range (RB11, RB7 shot blasting and sandblasting machines).
The main advantages of the dust collector are:
- filter insert made of non-woven polyester fabric
- automatic pneumatic system for cleaning the filter insert
- drawer for collecting dirt from the filter, which greatly facilitates cleaning of the dust collector
Filtration efficiency: 95%
KEY ADVANTAGES OF THE PF90 DUST COLLECTOR
- Filter material – Our filter is equipped with a polyester non-woven insert, which ensures effective filtration of contaminants.
- Automatic cleaning system – Equipped with a pneumatic filter cleaning system that ensures consistent filter performance.
- Contamination collection drawer – Thanks to the contamination collection drawer, the filters are easy to clean, which significantly increases the convenience of using the dust collector.
- Compatibility – If you own one of our sandblasters, we recommend that you equip it with a dust collector, as this is necessary for the safe operation of the equipment.
Technical data:
- Equipment dimensions: 1700 x 850 x 600 mm (L x W x H)
- Power: 1.1 kW
- Rotation: 2,900 RPM
- Connection hose diameter: 150 mm
- Extraction capacity: 2,800 m3/h
- Filtration efficiency: 95%
- Power supply: Electric
- Power: 400V / 3 PH / 50Hz (16A – 5-pin plug)
- C40A Protection required
- Weight: 250 kg
Installation requirements
- Power: 380 V / 3 phases / 50 Hz + socket combination box with appropriate fuses;
- Compressed air: –
- Ensuring the unloading process and the operating site
- Place the machine on stable, level ground.
Options
- –
Useful information:
- What is the difference between the RB7 and RB11 shot blasters?
The main difference between the RB11 and the RB7 is the size, i.e. the RB7 is smaller than the RB11. The differences can be checked in the technical data.
The second difference is that the RB7 does not have an upper suspension. The performance is the same for both shot blasters. The differences between the machines are clearly visible in our demonstration videos.
- How much dispersion is required for the shot blasting machine and what is the initial load?
The initial load is approximately 15 kg and the shot consumption is approximately 0.8-1 kg/hour (the shot in the machine is only replenished as it is consumed).
- Are the machines available from stock or are they made to order?
Due to the various control options, the machines are manufactured to order. The delivery time for the machines is between 1 and 4 weeks.
- What grain size do the RB11 and RB7 gunpowder sandblasters work with?
The machines are made of S090, S110, S170, S230 quality round steel gunpowder or stainless steel and can be used with gunpowder of the same size. The use of ‘sharp’ broken gunpowder causes five times more wear on consumable parts.
- Does the shot blaster require compressed air to operate?
No, compressed air is not required for the shot blaster to operate.
- Can abrasives other than steel shot be used in the shot blaster?
There are no contraindications to the use of corundum, for example, but this is not cost-effective (the machine quickly breaks up the abrasive and it is sucked out by the dust collector).
- What is the difference between a shot blaster and a sandblaster?
The difference between a shot blaster and a sandblaster lies in the abrasive used and the mode of operation. A shot blaster uses metal balls, mainly for surface treatment of metals, often in automatic operation.
A sandblaster uses sand or other mineral abrasives to treat various materials, where the sandblasting is done manually. In addition, a shot blaster can automatically clean, grind or prepare surfaces, while with a sandblaster, the operator must perform the operations manually.
- What are shot blasters used for?
A shot blaster is a device that mechanically cleans, grinds and strengthens metal surfaces by means of shot blasting. It removes rust, paint and contaminants, prepares surfaces for painting or coating, and increases the wear resistance of the material.