Description
This equipment consists of two hydraulically controlled moving plates (for the right and left wheels separately) and is capable of one-way or two-way independent movement (forward-backward, right-left), but additional directions can be added to the movements, for example curved or combined directions like diagonal.
This is perfect to simulate road conditions and turning characteristics.
This equipment is operated by a controller of 12 or 24 volt, which can be handled with the switch buttons built into the test lamp. No special preparation is required for its installation, as it can also be used on the workshop’s floor, but it can also be embedded into the concrete in front of or behind the brake and shock absorber test bench on the shaft or even on a four-post lift, ramp scissor lift. The price of the equipment does not include the hydraulic hose!
Features:
- Operation: Electro-hydraulic
- Movement: 2×4 motion
- Directions: forward-backward, out-in, twisting, separately, but combined movements are also possible
- Load: the axle has a load capacity of 4 tons
- Dimension: 720 x 720 mm
- Maximum test load: 2500 kg per axle load
- Operation: Electro-hydraulic
- Control: from the reference lamp, independent on both sides
- Directions of the movement: diagonal
- Control voltage: 12 V, 50 Hz
- Application site: next to the inspection pit or on the lift
- Drive-on height: 50 mm
- Inspection plate size: 560 x 650 mm
- Extreme outer edge size: 560x560x50 per each side (also available in custom sizes)
- Weight: 40 kg per each side
- Power supply: 400 V, 1.2 kW (also available with a power supply of 230 V)
- CE certification
- Custom manufacture
Options:
- Installation frame: 4-motion for an equipment with a loading capacity of 2 – 4 tons
- Installation frame: 4-motion for an equipment with a loading capacity of 12 – 18 tons
- Accessing ramp: 4-motion for an equipment with a loading capacity of 2 – 4 tons
- Accessing ramp: 4-motion for an equipment with a loading capacity of 12 – 18 tons
- Controlling lamp – 2-motion
- Controlling lamp – 4-motion
- Controlling lamp – 6-motion
- Controlling lamp – 8-motion
- transport, installation, 4-motion, load capacity of 2 – 4 tons (with own installation frame)
- transport, installation, 4-motion, load capacity of 2 – 4 tons (with own installation frame)
(2×2-motion equipment are also available but they are not suitable for Technical examination of vehicles.)
